One of the most thorough methods when staining is to use a thick natural bristle brush.
Putting a solid color stain on cedar siding.
Plus this type of stain is excellent at repelling water.
Those extractives can even bleed through many types of paint.
Transparent finishes stains transparent and semi transparent stains.
Cedar siding is a durable and attractive siding material but it requires protection from sunlight and moisture.
Your typical exterior paints being 100 acrylic is not meant for cedar siding where as a solid body paint stain is.
This is an advanced formulation that can stain and protect your cedar wood siding from the wear of any weather.
When it comes to recommended usage do apply a stain blocking primer before applying solid color stain but don t use an oil based solid color stains over a latex primer.
Prepare your cedar siding by washing it with soapy water to remove any dirt or dust if any has accumulated.
In most cases the solid color stain will usually be close to a matte finish.
You can apply this on any wood surface even if you just cleaned it out a little bit.
Staining cedar with a solid color stain.
Solid body paint stains looks like paint but soaks into wood protecting it even further than priming with a high bonding primer first putting a solid acrylic paint on top.
Thus solid color stains let some of the cedar s grain show through but none of the color.
These paint stains can come in latex water borne or alkyd base and water clean up.
Allow the washed surface to dry before recoating and apply primer paint to areas of bare wood.
The upside is that solid color stains will block most damaging ultraviolet light.
Solid color stains have solid particles but not nearly as many as paint.
As with paints 100 acrylic latex stains are recommended.
There are two common types of finishing wood siding.
Two topcoats are always better over bare wood that has been primed.
After you have washed it wait for it to dry before applying any stain to the cedar.
These may be applied to western red cedar by brush roller or pad.
It comes in many colors to choose from and can help customize your home.
What you get is a very uniform opaque color.
If your cedar wood and siding already has this type of paint stain on it you are required to put something very similar for a new coating.
Cedar shingles contain extractives that bleed to the surface when the wood becomes wet and then darken as the wood dries.
Cedar siding shingles provide beauty for any home but they must be properly coated to ensure a long life.
Either types of solid coatings are good most having the words fence and siding.
Solid color stain is not supposed to peel like paint does when applied to cedar siding.
The best way to prevent extractive bleed is to select a paint or stain that forms a seal over the cedar.
The unfortunate reality is that peeling solid color stain is a common occurrence.
Many factors can contribute to this problem.
It is a water based stain that has a semi transparent finish.
First many house painting contractors promote the use of a two coat paint job as offering greater value than a one coat job.
